How To Install Batteries In Roundup Sprayer

The Sure Shot® Wand and Comfort Wand® are great at providing control when spraying weeds, and they're also a breeze to use. Follow these simple steps and you'll be on your manner to stopping weeds with ease.

Trouble using your wand? Jump to one of these topics to find a quick fix.

Motor isn't running.
Motor runs but wand won't spray

Man holding a Roundup Weed Killer jug.

Unsnap the holder and remove the wand from the side of the canteen.

Woman holding a Sure Shot® Wand.

Unwrap the hose completely and pull out the battery tab on the handle. The motor in the wand won't work if the protective battery tab is not removed before the commencement use.

Woman setting up a Sure Shot® Wand.

Insert the red plug into the knob on the cap until information technology clicks, and turn the knob to "ON". Make sure the cherry-red plug is firmly attached to the cap. (If your canteen still has the spout cap instead of the twist cap, make sure the spout is sticking straight up.)

Man using a Roundup Weed Killer jug.

Extend the wand until information technology locks into position.

Step 5

Slide the trigger lock on the handle to the "unlocked" position.

Step 6

Twist nozzle to the desired spray blueprint. Make sure it isn't gear up to "OFF." If you lot're using the Sure Shot® Wand, snap the protective shield over the wand nozzle.

Man using a Roundup Weed Killer jug with a Sure Shot® Wand.

Spray the weeds that y'all desire to kill. It'southward that easy.

WAND NOT WORKING? Go Information technology Dorsum IN ACTION

If You lot Don't Hear the Motor Running

If you lot've followed the instructions above and the motor of your Comfort Wand® or Sure Shot® Wand nonetheless isn't running, attempt these steps.

Ostend that the trigger lock is disengaged.

Double-check the battery tab has been removed.

If you still don't hear the motor running, it may be fourth dimension to modify out the batteries. Unscrew the battery compartment on the base of the wand and supplant the AA batteries.

If You Hear the Motor Running, just It's Not Spraying

If the motor is running, but yous're unable to spray, follow these steps to get back into activity.

Bank check the cap.
Make sure the knob is turned to "ON.

Check the nozzle setting.
Ostend the nozzle is rotated to a spray blueprint.

Re-prime the sprayer.
Re-prime the sprayer past engaging the trigger for upwards to thirty seconds, until it begins to spray.

Cheque the nozzle for clogs.
If the sprayer tip is clogged, don't use soap or other cleaning agents to clean it. If necessary, make clean the outer sprayer surface but with a damp towel. Never submerge the wand handle in water.

If you're yet having problems, don't hesitate to accomplish out to our Consumer Services team.

Quick Tip:

When storing your Sure Shot® Wand or Condolement Wand® for long periods of time (like over the winter), remove the batteries from the wand. If the batteries corrode inside the wand, y'all will likely demand to supplant information technology.